邦懋塑胶为您提供详细的Noryl PC/ABS C4210物性表参数。

广州市邦懋新材料技术有限公司不仅是专业的Noryl PC/ABS C4210原料供应商，亦注重技术支持及全方位的解决方案，提供从材料鉴定、模具设计、成型加工等系列帮助，亦可为客户量身定制各特殊性能之Noryl PC/ABS C4210材料，进而协助客户提高产品竟争力。

CYCOLOY PC/ABS C4210物性表

10% GR PC+ABS. High heat resistance. Excellent strength/rigidity. Good IMPACT/appearance. Automotive instrument panels.
相关色号：C4210-76701

TYPICAL PROPERTIES (1)
MECHANICAL机械性能	value	Unit	Standard
Tensile Stress, yld, Type I, 5 mm/min / 抗张程度,屈服,类型I,5 mm/min	75	MPa	ASTM D 638
Tensile Stress, brk, Type I, 5 mm/min / 抗张程度,断裂,类型I,5 mm/min	75	MPa	ASTM D 638
Tensile Strain, yld, Type I, 5 mm/min / 拉伸伸长,屈服,类型I,5 mm/min	3	%	ASTM D 638
Tensile Strain, brk, Type I, 5 mm/min / 拉伸伸长,断裂,类型I,5 mm/min	3	%	ASTM D 638
Tensile Modulus, 5 mm/min / 拉伸模量,5 mm/min	4410	MPa	ASTM D 638
Flexural Stress, brk, 1.3 mm/min, 50 mm span	120	MPa	ASTM D 790
Flexural Modulus, 1.3 mm/min, 50 mm span / 挠曲模量, 1.3 mm/min, 50 mm 跨距	3720	MPa	ASTM D 790
Tensile Stress, break, 5 mm/min / 抗张程度,断裂,5mm/min	70	MPa	ISO 527
Tensile Strain, break, 5 mm/min / 拉伸伸长,断裂,5mm/min	3.5	%	ISO 527
Tensile Modulus, 1 mm/min / 拉伸模量,1 mm/min	4000	MPa	ISO 527
Flexural Stress, break, 2 mm/min	120	MPa	ISO 178
Flexural Modulus, 2 mm/min / 弯曲模量,2 mm/min	3800	MPa	ISO 178
Hardness, H358/30 / 球压硬度，H358/30	116	MPa	ISO 2039-1
Hardness, Rockwell R / 硬度, 洛氏 R	121	-	ISO 2039-2
IMPACT	value	Unit	Standard
Izod Impact, unnotched, 23°C / 无缺口悬臂梁冲击 23°C	507	J/m	ASTM D 4812
Izod IMPACT, unnotched, -30°C	587	J/m	ASTM D 4812
Izod Impact, notched, 23°C / 悬臂梁缺口冲击强度23°C	122	J/m	ASTM D 256
Izod IMPACT, notched, -30°C / 悬壁梁缺口冲击强度, -30°C	90	J/m	ASTM D 256
Instrumented Impact Total Energy, 23°C / 仪表控制抗冲击总能量，23°C	20	J	ASTM D 3763
Instrumented IMPACT Total Energy, -30°C / 装有测量仪表的落镖冲击Total Energy，-30°C	16	J	ASTM D 3763
Izod IMPACT, unnotched 80*10*4 +23°C	35	kJ/m²	ISO 180/1U
Izod IMPACT, notched 80*10*4 +23°C / 悬壁梁缺口冲击强度，80*10*4 +23°C	11	kJ/m²	ISO 180/1A
Izod IMPACT, notched 80*10*4 -30°C / 悬壁梁缺口冲击强度，80*10*4 -30°C	9	kJ/m²	ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm / 简支梁缺口冲击强度，23°C，C80*10*4 sp=62mm	11	kJ/m²	ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm / 简支梁缺口冲击强度，-30°C，C80*10*4 sp=62mm	9	kJ/m²	ISO 179/1eA
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm	35	kJ/m²	ISO 179/1eU
THERMAL	value	Unit	Standard
HDT, 0.45 MPa, 3.2 mm, unannealed / 热变形温度,0.45 MPa, 3.2 mm,未退火	134	°C	ASTM D 648
HDT, 1.82 MPa, 3.2mm, unannealed / 热变形温度,1.82 MPa, 3.2mm,未退火	125	°C	ASTM D 648
HDT, 1.82 MPa, 6.4 mm, unannealed / 热变形温度，1.82 MPa, 6.4 mm, 未退火	127	°C	ASTM D 648
Thermal Conductivity / 导热系数	0.2	W/m-°C	ISO 8302
Vicat Softening Temp, Rate B/50 / 维卡软化温度 B级/50	134	°C	ISO 306
Vicat Softening Temp, Rate B/120 / 维卡软化温度,B级/120	136	°C	ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm / 热变形温度，0.45 MPa, 未退火, 100 mm 跨距	134	°C	ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm / 热变形温度，1.8 MPa, 未退火, 100 mm 跨距	120	°C	ISO 75/Ae
PHYSICAL	value	Unit	Standard
Specific Gravity/比重	1.22	-	ASTM D 792
Mold Shrinkage, flow, 3.2 mm / 模塑收缩量，流动，3.2 mm	0.3 - 0.5	%	SABIC Method
Mold Shrinkage, xflow, 3.2 mm / 模塑收缩量，横向，3.2 mm	0.3 - 0.5	%	SABIC Method
Melt Flow Rate / 熔流率, 260°C/5.0 kgf	22	g/10 min	ASTM D 1238
Density/密度	1.22	g/cm³	ISO 1183
Melt Volume Rate, MVR at 260°C/5.0 kg / 溶化体积流率,MVR, 260°C/5.0 kg	15	cm³/10 min	ISO 1133
ELECTRICAL	value	Unit	Standard
Volume Resistivity/体积电阻率	>1.E+15	Ohm-cm	IEC 60093
Surface Resistivity, ROA / 表面电阻率	>1.E+15	Ohm	IEC 60093