邦懋塑胶为您提供详细的Noryl PC/ABS C4210HF物性表参数。

广州市邦懋新材料技术有限公司不仅是专业的Noryl PC/ABS C4210HF原料供应商，亦注重技术支持及全方位的解决方案，提供从材料鉴定、模具设计、成型加工等系列帮助，亦可为客户量身定制各特殊性能之Noryl PC/ABS C4210HF材料，进而协助客户提高产品竟争力。

CYCOLOY PC/ABS C4210HF物性表

PC+ABS Blend with 10% Glass Reinforce. High flow, High heat resistance., Excellent balance strength/rigidity. Good IMPACT/appearance.
相关色号：C4210HF-76701

TYPICAL PROPERTIES (1)
MECHANICAL机械性能	value	Unit	Standard
Tensile Stress, yld, Type I, 5 mm/min / 抗张程度,屈服,类型I,5 mm/min	85	MPa	ASTM D 638
Tensile Stress, brk, Type I, 5 mm/min / 抗张程度,断裂,类型I,5 mm/min	85	MPa	ASTM D 638
Tensile Strain, yld, Type I, 5 mm/min / 拉伸伸长,屈服,类型I,5 mm/min	3	%	ASTM D 638
Tensile Strain, brk, Type I, 5 mm/min / 拉伸伸长,断裂,类型I,5 mm/min	3	%	ASTM D 638
Tensile Modulus, 5 mm/min / 拉伸模量,5 mm/min	4900	MPa	ASTM D 638
Flexural Stress, brk, 1.3 mm/min, 50 mm span	140	MPa	ASTM D 790
Flexural Modulus, 1.3 mm/min, 50 mm span / 挠曲模量, 1.3 mm/min, 50 mm 跨距	4300	MPa	ASTM D 790
Tensile Stress, yield 5 mm/min / 抗张程度，屈服, 5 mm/min	90	MPa	ISO 527
Tensile Stress, break, 5 mm/min / 抗张程度,断裂,5mm/min	90	MPa	ISO 527
Tensile Strain, break, 5 mm/min / 拉伸伸长,断裂,5mm/min	3.2	%	ISO 527
Tensile Modulus, 1 mm/min / 拉伸模量,1 mm/min	4700	MPa	ISO 527
Flexural Stress, yield, 2 mm/min / 弯曲强度,屈服,2 mm/min	125	MPa	ISO 178
Flexural Stress, break, 2 mm/min	135	MPa	ISO 178
Flexural Modulus, 2 mm/min / 弯曲模量,2 mm/min	4250	MPa	ISO 178
Hardness, H358/30 / 球压硬度，H358/30	116	MPa	ISO 2039-1
Hardness, Rockwell R / 硬度, 洛氏 R	121	-	ISO 2039-2
IMPACT	value	Unit	Standard
Izod Impact, unnotched, 23°C / 无缺口悬臂梁冲击 23°C	480	J/m	ASTM D 4812
Izod IMPACT, unnotched, -30°C	480	J/m	ASTM D 4812
Izod Impact, notched, 23°C / 悬臂梁缺口冲击强度23°C	75	J/m	ASTM D 256
Izod IMPACT, notched, -30°C / 悬壁梁缺口冲击强度, -30°C	60	J/m	ASTM D 256
Instrumented Impact Total Energy, 23°C / 仪表控制抗冲击总能量，23°C	15	J	ASTM D 3763
Instrumented IMPACT Total Energy, -30°C / 装有测量仪表的落镖冲击Total Energy，-30°C	8	J	ASTM D 3763
Izod IMPACT, unnotched 80*10*4 +23°C	30	kJ/m²	ISO 180/1U
Izod IMPACT, notched 80*10*4 +23°C / 悬壁梁缺口冲击强度，80*10*4 +23°C	8	kJ/m²	ISO 180/1A
Izod IMPACT, notched 80*10*4 -30°C / 悬壁梁缺口冲击强度，80*10*4 -30°C	6	kJ/m²	ISO 180/1A
THERMAL	value	Unit	Standard
HDT, 0.45 MPa, 3.2 mm, unannealed / 热变形温度,0.45 MPa, 3.2 mm,未退火	134	°C	ASTM D 648
HDT, 1.82 MPa, 3.2mm, unannealed / 热变形温度,1.82 MPa, 3.2mm,未退火	126	°C	ASTM D 648
HDT, 1.82 MPa, 6.4 mm, unannealed / 热变形温度，1.82 MPa, 6.4 mm, 未退火	128	°C	ASTM D 648
CTE, -40°C to 40°C, flow / 线形膨胀系数,-40°C 到40°C,流动	4.E-05	1/°C	ASTM E 831
CTE, -40°C to 40°C, xflow / 线形膨胀系数,-40°C 到40°C,横向	7.5E-05	1/°C	ASTM E 831
Thermal Conductivity / 导热系数	0.2	W/m-°C	ISO 8302
PHYSICAL	value	Unit	Standard
Specific Gravity/比重	1.22	-	ASTM D 792
Mold Shrinkage, flow, 3.2 mm / 模塑收缩量，流动，3.2 mm	0.3 - 0.5	%	SABIC Method
Mold Shrinkage, xflow, 3.2 mm / 模塑收缩量，横向，3.2 mm	0.3 - 0.5	%	SABIC Method
Melt Flow Rate / 熔流率, 260°C/5.0 kgf	37	g/10 min	ASTM D 1238