邦懋塑胶为您提供详细的Noryl PC/ABS C4215HF物性表参数。

广州市邦懋新材料技术有限公司不仅是专业的Noryl PC/ABS C4215HF原料供应商，亦注重技术支持及全方位的解决方案，提供从材料鉴定、模具设计、成型加工等系列帮助，亦可为客户量身定制各特殊性能之Noryl PC/ABS C4215HF材料，进而协助客户提高产品竟争力。

CYCOLOY PC/ABS C4215HF物性表

Cycoloy C4215HF is a 15% glass reinforced, non-FR PC+ABS grade with high heat resistance, excellent strength and rigidity with good cosmetic apprearance. It combines good processability with a low shrinkage.

TYPICAL PROPERTIES (1)
MECHANICAL机械性能	value	Unit	Standard
Tensile Stress, break, 5 mm/min / 抗张程度,断裂,5mm/min	95	MPa	ISO 527
Tensile Strain, break, 5 mm/min / 拉伸伸长,断裂,5mm/min	3	%	ISO 527
Tensile Modulus, 1 mm/min / 拉伸模量,1 mm/min	5550	MPa	ISO 527
Flexural Modulus, 2 mm/min / 弯曲模量,2 mm/min	4700	MPa	ISO 178
IMPACT	value	Unit	Standard
Izod IMPACT, unnotched 80*10*3 +23°C	0	kJ/m²	ISO 180/1U
Izod IMPACT, unnotched 80*10*3 -30°C	0	kJ/m²	ISO 180/1U
Izod IMPACT, notched 80*10*3 +23°C / 悬壁梁缺口冲击强度, 80*10*3 +23°C	0	kJ/m²	ISO 180/1A
Izod IMPACT, notched 80*10*3 -30°C / 悬壁梁缺口冲击强度, 80*10*3 -30°C	0	kJ/m²	ISO 180/1A
Izod IMPACT, unnotched 80*10*4 +23°C	33	kJ/m²	ISO 180/1U
Izod IMPACT, unnotched 80*10*4 -30°C	37	kJ/m²	ISO 180/1U
Izod IMPACT, notched 80*10*4 +23°C / 悬壁梁缺口冲击强度，80*10*4 +23°C	8	kJ/m²	ISO 180/1A
Izod IMPACT, notched 80*10*4 -30°C / 悬壁梁缺口冲击强度，80*10*4 -30°C	7	kJ/m²	ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*3 sp=62mm / 简支梁缺口冲击强度，23°C，C80*10*3 sp=62mm	9	kJ/m²	ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*3 sp=62mm / 简支梁缺口冲击强度，-30°C，C80*10*3 sp=62mm	7	kJ/m²	ISO 179/1eA
Charpy 23°C, Unnotch Edgew 80*10*3 sp=62mm	38	kJ/m²	ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*3 sp=62mm	44	kJ/m²	ISO 179/1eU
THERMAL	value	Unit	Standard
Vicat Softening Temp, Rate B/50 / 维卡软化温度 B级/50	136	°C	ISO 306
Vicat Softening Temp, Rate B/120 / 维卡软化温度,B级/120	137	°C	ISO 306
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm / 热变形温度，1.8 MPa, 未退火,80*10*4， 64.0 mm 跨距	129	°C	ISO 75/Af
PHYSICAL	value	Unit	Standard
Density/密度	1.25	g/cm³	ISO 1183
Water Absorption, (23°C/sat) / 吸水率, (23°C/sat)	0.6	%	ISO 62
Moisture Absorption (23°C / 50% RH) / 吸水率, 平衡,(23°C / 50% RH)	0.2	%	ISO 62
Melt Volume Rate, MVR at 260°C/5.0 kg / 溶化体积流率,MVR, 260°C/5.0 kg	31	cm³/10 min	ISO 1133