详细介绍:
产品名称:810深孔极压切削油(普通碳钢专用)
产品简介:
810深孔极压切削油(普通碳钢专用)专门适用于普通碳钢、铸铁等各种材质工件的深孔枪钻、深孔镗的切削加工。
?810深孔极压切削油(普通碳钢专用)的详细介绍
?DRK-810深孔极压切削油(普通碳钢专用)DRK-810 deep hole gun drilling cutting oil
??? 本产品针对深孔枪钻加工的特点,采用国内先进配方,以合成油精制矿物油为基础,添加多种功能添加剂,用特殊生产工艺精制而成。
??? This product for deep hole gun drill processing, using the domestic advanced formula, using synthetic oil refined mineral oil as base, adding a variety of functional additives, special production process and refined
产品特性:
??? 1.安全性好,对人和环境无不良影响。
??? 2.优良的防锈性、润滑性和极压性,加工精度高。
??? 3.本品含有高渗透性润滑剂,降低摩擦阻力及操作负荷。
??? 4.延长刀模具的使用寿命,减少枪钻头磨损断裂。
??? 5.粘度合适且长时间保持不变,挥发性小,稳定性高。
??? 6.油品流动性好,排屑快,清洗性好。
??? 7.油品抗气雾性能优良,油料消耗较少,使用成本较低。
Products characteristics:
?? ● good safety, no adverse effects on people and the environment.● antirust, lubrication and extreme pressure, high precision machining.This product contains high permeability lubricant, reducing friction and the operating load.● extend knife die life, reduce the gun drill wear fracture.● suitable viscosity and long time constant, low volatility, high stability.● oil has good fluidity, fast chip removal, cleaning and good.The excellent performance of anti fog oil, fuel consumption is less, the use of low cost
产品用途:适用于普通碳钢、铸铁等各种材质工件的深孔枪钻、深孔镗的切削加工。
??? Product use: machining deep hole gun is applicable to stainless steel, aluminum alloy, steel, cast iron and other materials of drilling, deep hole boring of workpiece.?
技术指标(qualification ):
注意事项:密封储存,防止日晒、雨淋或混入杂质,严禁与其他油品混用。
包装及储运:200升国标桶包装,净重170公斤/桶。
Note: sealed storage, to prevent the sun, rain or impurities, is strictly prohibited and other oil mixture.
Packing and storage: 200 liters GB drum, net weight 170 kg / barrel..
|