简要说明：

美国omega FMI-100-MKM-FD流量计

率的可编程界面显示，总的命令和控制
FMI-100系列
1年保修新产品！CE
FMI-100系列：速率可编程界面显示，总的命令和控制
FMI-102d
显示瞬时和累计流量
RS232或RS485数字接口（多点多达64个设备）
可编程，光隔离脉冲和数字输出
使用FMA1700 / 1800或FMA5400 / 5500系列
16点的可编程控制，在斜坡上/下
自由配置和监控的实用软件
该系列流量计FMI-100和0到5的模拟控制器，5至10，0至10伏或4到20毫安的输出输入接口，其中流动的迹象/控制，累加器或报警的功能是必需的。当重新传输的流量和/或积算仪通过光隔离脉冲输出或串行通信功能所需的。本地的或可编程的流量控制器的设定点控制（不需要主机PC的存在）。图形液晶显示器具有大的13毫米（0.51“）的流量和5.5毫米的数字（0.21“）的总和可以由用户设置同时显示不同的流动参数的组合：流量，计算器，流量报警，并诊断事件。所有的配置参数的设置很容易通过一个简单的用户界面菜单6按钮键盘可访问密码保护的驱动。流量计和/或流量控制器，提供跳线可选FMI-100 0至5 VDC或4至20 mA模拟控制信号的设定点。流量设定点可以通过键盘的局部调整，通过PC主机采用数字通信接口的远程，或斜坡向上/向下支持内置16步批量预先用程序。可编程流量脉冲输出的运行独立于累加器和基于配置设置可以提供脉冲频率的瞬时流体的流量比例。这两FMI-100提供独立可编程流量累加器。两累加器更新每隔100毫秒，可设置为激活不同的事件。主要积算累计备份在EEPROM存储器的每一秒。它为用户提供了灵活的报警/报警系统监控条件，超出配置的限制以及视觉反馈，用户通过LCD或通过光隔离的输出流。所有的过程数据和设置可以读取和修改手动通过本地液晶键盘或通过RS232或RS485通信接口的数字。提供专有的ASCII命令集和免费软件接口通信的实用软件。
 

规格
ADC/DAC Resolution: 12-bit
Analog Inputs: 0 to 5 Vdc, 4 to 20 mA, 5 to 10 Vdc (jumper-selectable), 0 to 10 Vdc (contact Flow Engineers at Omega for details)
Analog Outputs: 0 to 5 Vdc, 4 to 20 mA (jumper-selectable)
LCD: 128 x 64 graphic LCD with instantaneous flow reading and total volume indication, adjustable LCD contrast and back light
Key-Pad: Local 6 tactical push buttons
Pulse Output: User-programmable, optically-isolated, with preset active low time interval (10 to 6550 mS).
Digital Output: Two programmable, optically-isolated, UCE @ 40 Vdc, ICE @ 150 mA (voltage isolation; 250 Vrms)
Digital Interface: RS232 or RS485 (multidrop capability up to 64 devices)
Protocol: Proprietary ASCII software interface command set
Speed: 1200/2400/4800/9600/19200/38400/57600/115200 baud (user selectable)
Configuration:
Stop Bit: 1
Data Bits: 8
Parity: None
Flow Control: None
Addressing: Maximum 255 addresses (for RS485 option only)
Type: RS232 or RS485 2-wire
Power Requirements: 12 to 26 Vdc (up to 60 mA maximum)
Interface Connectors: Process I/O signals and digital RS232/RS485 interface, miniature 9-pin female D-SUB connector; digital optically-isolated outputs; TERM BLOCK HEADER 4POS 3.5 mm male pins, shrouded
Environment: Installation Level II, Pollution Degree II, (per IEC 664)
Electromagnetic Compatibility: Compliant ref. 89/336/EEC as amended; emission standard; EN 55011:1991, Group 1, Class A immunity standard: EN 55082- 1:1992
Operating Temperature: -10 to 70°C (14 to 158°F)
Dimensions: 86.4 W x 76.2 H x 19.1 mm D (3.4 x 3.0 x 0.75")
Weight: Approximately 125 g (0.3 lb)
 

产品型号  产品描述

FMI-102  RS232 monitor/control interface, no display
FMI-105  RS485 monitor/control interface, no display
FMI-102-10V  RS232 monitor/control interface, no display for 0 to 10V input/output
FMI-105-10V  RS485 monitor/control interface, no display for 0 to 10V input/output
FMI-102D  Rate/total, display, RS232 monitor/control interface
FMI-105D  Rate/total, display, RS485 monitor/control interface
FMI-102D-10V  Rate/total, display, 0 to 10V input/output monitor/control interface
FMI-105D-10V  Rate/total, display, 0 to 10V input/output monitor/control interface
Meter Accessories
FMI-100-MKM-DD  Meter mounting kit with two 9-pin D connectors
FMI-100-MKM-RD  Meter mounting kit with RJ11 to 9-pin D connector
FMI-100-MKM-FD  Meter mounting kit with flat wire to 9-pin D connector
Controller Accessories
FMI-100-MKC-2C  Controller mounting kit, 12VDC North American style plug with connector
FMI-100-MKC-2N  Controller mounting kit, 12VDC North American style plug, no connector
FMI-100-MKC-4C  Controller mounting kit, 24VDC North American style plug with connector
FMI-100-MKC-4N  Controller mounting kit, 24VDC North American style plug, no connector
FMI-100-MKC-2C-AU  Controller mounting kit, 12VDC Australian style plug with connector
FMI-100-MKC-2N-AU  Controller mounting kit, 12VDC Australian style plug, no connector
FMI-100-MKC-4C-AU  Controller mounting kit, 24VDC Australian style plug with connector
FMI-100-MKC-4N-AU  Controller mounting kit, 24VDC Australian style plug, no connector
FMI-100-MKC-2C-EU  Controller mounting kit, 12VDC European style plug with connector
FMI-100-MKC-2N-EU  Controller mounting kit, 12VDC European style plug, no connector
FMI-100-MKC-4C-EU  Controller mounting kit, 24VDC European style plug with connector
FMI-100-MKC-4N-EU  Controller mounting kit, 24VDC European style plug, no connector
FMI-100-MKC-2C-UK  Controller mounting kit, 12VDC U.K. style plug with connector
FMI-100-MKC-2N-UK  Controller mounting kit, 12VDC U.K. style plug, no connector
FMI-100-MKC-4C-UK  Controller mounting kit, 24VDC U.K. style plug with connector
FMI-100-MKC-4N-UK  Controller mounting kit 24VDC U.K. style plug, no connector

注释: Comes complete with operator’s manual.
 

美国omega FMI-100-MKM-FD流量计

FMG811流量计 美国omega