| 详细介绍：
SKD61进口模具焊条
8407-H13焊丝
|
特 性
|
焊金耐热 耐腐蚀 耐磨耗性能优良,用于修复基体合金相似的高温加工工具,如H13钢.
硬度HRC 43～46度A hot work tool steel that is tungsten free,Good hot hardness up to 565℃.For repair of H-13 tool steels and appications in the die casting and forging industries subject to high thermal gradients.
|
|
用 途
|
焊补有色金属压铸模具 PA POM PS PE EP Weld-repair non-ferrous metal die-casting molds PA POM PS PE EP
|
|
规 格
|
1.0￠ 1.2￠ 1.6￠ 2.0￠ 2.4￠
|
8407-H12焊丝
|
特 性
|
Cr W V 多元合金焊丝 ，熔敷金属具有自硬性的马氏体组织。具有高硬度耐高温冲击，焊后机加工困难。硬度HRC48～52 Cr multielement alloy welding wire, w. v. deposited metal has since the rigid martensite organization. With high hardness, impact resistant machining difficulty after welding. Hardness HRC48 ~52
|
|
用 途
|
焊补热锻模 冲模 热加工工具 热切模等Hot forging die weld-repair hot-working tools etc. Eagerly
|
|
规 格
|
1.0￠ 1.2￠ 1.6￠ 2.0￠
|
SKD61焊丝
|
特 性
|
焊金耐疲劳 耐热 耐磨耗冲击,一般热压铸模具常有龟裂纹状,大部分是热应力引起,热处理调至适当硬度改善其寿命,硬度太高或太低均不适用.HRC43～47 Welding gold fatigue resistance, abrasion resistance impact resistant heat die-casting molds, most often turtle crack is caused by thermal stress, heat treatment to improve its service life, suitable hardness hardness too much or too little are not applicable.
|
|
用 途
|
焊补热气冲模,铜铝锌热锻模,铝挤压模. Hot stamping, weld-repair copper aluminum and zinc hot forging, aluminum extrusion die
.
|
|
规 格
|
1.0￠ 1.2￠ 1.6￠ 2.0￠
|
|
放大图片
